Sae Flangesare also called flanges or flanges. Flanges are parts that connect shafts and shafts and are used for connection between pipe ends. In addition, there are flanges used for the inlet and outlet of equipment. It is also used for the connection between two equipment such as reducer flanges. With the rapid development of science and technology, flanges have also been improved technically, but the existing It is not easy to disassemble the flange in the technology. When disassembling the flange, it is necessary to turn the screw and nut one by one to disassemble, which affects the working time and work efficiency. Then, let's learn about the technical realization of the sae flange that is easy to disassemble!

Sae Flanges technical realization elements:

The purpose of the sae flange is to solve the problem that the flange cannot be easily disassembled in the existing technology. When disassembling the flange, the screws and nuts need to be disassembled one by one, which causes a waste of working time and affects the working efficiency. In view of the shortcomings of the existing technology, Taken

In order to achieve the above purpose, the utility model includes a lower flange body, a circular concave platform, a circular arc through wall, a screw rod and a nut which are located below the circular concave platform and are fitted with the circular arc through wall and the lower flange body. 1. The rotating flange body is easy to disassemble, including: the rotating flange body is composed of a rotating ring, an upper flange body, a second threaded hole, and a semicircular concave table; a threaded hole is provided on the right side of the front end of the fixed shaft and fitted in A lower flange body formed by a semicircular concave platform of a threaded hole is screwed with the nut, and the inside of a threaded hole is screwed with the outer surface of the screw rod. A rotating ring is provided at the center of the outer surface of the fixed shaft and is rotatably connected. The rear side of the rotating ring is welded to the left end face of the upper flange body, and a second threaded hole is arranged at the right end of the upper end face of the upper flange body, and the inner surface of the second threaded hole is screwed with the outer surface of the screw rod.

There are also 4 screw rods with the same size and structure to fix the upper flange body and the lower flange body, and cooperate with the screw rods to carry out the fixing operation. The number of rotating flange bodies is symmetrically distributed by 2, and the object is fixed by the simultaneous fixing effect on both sides. , also set the gasket on the contact surface of the lower flange body and the rotating flange body. By making the thickness of the gasket 1MM, the pressure on the contact surface is eased and the deformation of the contact surface is prevented due to excessive pressure. The rotating wheel is a circular structure. Below the size of the outer ring of the fixed shaft, it is embedded and fixed on the fixed shaft to be able to rotate. Moreover, the lower flange body and the upper flange body are made of carbon steel, and the screw rod is made of stainless steel.

Sae Flanges by setting the rotating flange body and turning the screw rod in the second threaded hole to make the upper flange body in a rotatable state, one end of the upper flange body can be rotated around the fixed axis through the rotating ring, and the semicircle through the wall and the semicircle concave are released. In the fixed state of the seat object, the flange operation cannot be simply removed in the prior art, and the screw rod and the nut need to be rotated one by one when the flange is removed, thereby wasting work time.

The above is the technical realization of the easy-to-disassemble sae flange. If you want to know more, please feel free to contact us!