Specific implementation examples of split flanges

Embodiments based on split flanges All other embodiments obtained without creative work by a person of ordinary skill in the art fall within the scope of split flange protection The split flange provides a technical proposal, which comprises a coupling body comprising two shaft sleeves, one end of which is fixedly connected with a flange, and the other end of which is fixedly connected with two flanges. The coupling body comprises a supporting ring and two supporting rings, which are fixedly connected with one flange and the ends of the two flanges close to the shaft sleeve Opposite surfaces of the springs are fixedly connected with the fixed cylinder The sound insulation component comprises a protective sleeve movably sleeved on the surfaces of the first flange and the second flange The surface of the protective sleeve is fixedly connected with a splint plate and two fixing plates The inner wall of the protective sleeve is fixedly connected with the sound insulation foam, which passes through the sound insulation foam arrangement to reduce the noise when the equipment rotates

The inner wall of the split flange shaft sleeve is fixedly connected with the buffer plate The arrangement of the buffer plate can reduce the wear caused by the rotation of the two shafts in the shaft sleeve The top of the splint is movably connected with the bottom of the two fixing plates The end of a flange far away from the shaft sleeve is fixedly connected with the positioning ring The ends of the two flanges far away from the shaft sleeve are fixedly connected with the two positioning rings The inner wall of the two positioning rings is movably connected with the surface of a positioning ring, the surface of a flange is fixedly connected with a fixing block, the surface of the two flanges is fixedly connected with the two fixing blocks, the front side of the two fixing pieces is fixedly connected with the clamping block, and the clamping groove is clamped in the clamping block

Working principle of split flange: When in use, the installer moves the split flange to the required position and then sleeves the two shaft sleeves on the two shafts to be connected for fixing The cushion plate fixed in the shaft sleeve can reduce the wear caused by the shaft rotating in the shaft sleeve At this time, the inner walls of the two locating rings are movably connected with the surface of the one locating ring

Twist a flange or two flanges for positioning so that the clamp on the two flanges is clamped in a groove opened by a fixing plate on the one flange At this time, one flange is aligned with the fixing cylinder on the two flanges Bolts pass through fixing cylinders on one flange and two flanges, and then nuts are used to fix one flange and two flanges The spring is used to cushion the connection between one flange and two flanges when the two shafts rotate and prevent the insufficient centering accuracy of the two shafts from reducing the service life of the coupling In order to prevent the coupling from making noise during rotation, the protective sleeve can be sleeved on one flange and two flanges, and a splint at the notch of the protective sleeve can be clamped at the gap between the two fixing plates and the surface of the protective sleeve to fix the protective sleeve It can reduce noise when the device rotates in the presence of an acoustic foam fixedly connected to the inner wall of the protective sleeve

It should be noted that the terms first and second relations are used herein only to distinguish one entity or business from another and do not necessarily require or imply any such actual relationship or order between these entities or business In addition, the terms "including", "including" or any other variation thereof are intended to encompass a non-exclusive process method article or equipment that includes, therefore, a series of elements not only those elements but also other elements not explicitly listed or elements inherent in such process method article or equipment